Name | Hoff Towel Clamp Forceps |
Lead Time | 0-3 days |
Competitor | ;1757-29;1757-34;1757-29_1757-34; |
Specialty | General Instruments-Ring-Handled Forceps – Sponge & Towel |
Material Finish | Stainless Steel |
Grade | Premium Operating Room |
Units of Measurement | Each |
Manufacturer | Qari Surgical |
Sterility | Non-Sterile |
Usage | Reusable |
Hoff Towel Clamp Forceps
Hoff Towel Clamp Forceps
Hoff Towel Clamp Forceps have jaw tips that are round with a flat surface area. These tips are designed to eliminate penetration to drapes when they are held in place during surgical operations. Depending on the type of drapes being held or the size of the area, the clamp forceps are offered in two different overall lengths.
SKU:
QS-01-254
Category: Forceps & Clamps
Description
Reviews (0)
Be the first to review “Hoff Towel Clamp Forceps” Cancel reply
Related products
Adson Thumb Forceps – Angled Tips
SKU:
QS-01-127
Adson Thumb Forceps - Angled Tips
angled tips, 4-3/4" (12.1 cm)
Adson Thumb Forceps are handcrafted from surgical grade German stainless steel with angled tips. Available in a variety of forms: for dressings with a serrated platform or for tissue with a serrated platform and 1x2 teeth or 1x2 teeth with cross-serrated tips.
Adson Bipolar Forceps
SKU:
QS-01-124
Adson Bipolar Forceps
1.0 mm tip, smooth jaw, 4-3/4" (12.0 cm)
Adson Bipolar Forceps are designed to minimize heat and current while coagulating. For use during bipolar electrosurgical procedures, these forceps are designed with a 1.0 mm tip and a smooth jaw. Available in both insulated and insulated with irrigation. Just as with their standard counterparts, these forceps are the most common bipolar forcep model. Bipolar forceps are designed to control temperatures, minimize heat and current spread and reduce tissue sticking or charring while coagulating during bipolar electrosurgical procedures. They are available in a variety of styles that provide bipolar coagulating capabilities for a wide range of procedures: irrigating or non-irrigating (for flushing surgical site to improve visualization), with or without insulation (to eliminate conduction to surrounding tissues when performing deep procedures), straight or bayonet-shaped (to enhance visibility by keeping the surgeon's hand from the line of sight). Manufactured from premium, German stainless steel with a satin finish. Call us today regarding non-stick versions of our line of bipolar forceps.
Adson Thumb Forceps
SKU:
QS-01-126
Adson Thumb Forceps
standard pattern.
Adson Thumb Forceps are handcrafted from surgical grade German stainless steel. Available in a variety of forms: for dressings with a serrated platform or for tissue with a serrated platform and 1x2 teeth. These forceps are also known as pickups, and are by far the most common style of thumb forceps. Each style is also available several different lengths for a comfortable grip
Adair-Allis Tissue Forceps
SKU:
QS-01-118
9x10 teeth, 6" (15.0 cm)
Adair-Allis Tissue Forceps are 6" long and are primarily used in general procedures in instances such as when diseased tissue needs to be held. The 9x10 teeth on the tips of the jaws provide a sure grasp of the tissue being held, and can also be used to approximate the edges of the membrane that creates the abdominal cavity lining.
Allis Tissue Forcep
SKU:
QS-01-137
Allis Tissue Forceps
standard pattern
standard pattern of the Allis Tissue Forceps are intended for the use of firmly grabbing or holding body tissue during surgery. This pattern includes a ratchet ring-handle with a selection of different sizes and types of teeth to accommodate various medical procedures. These teeth curve to the inside and may cause less harm to the tissue because of decreased general pressure applied to the area.
Adson Thumb Forceps – Fenestrated Handles
SKU:
QS-01-129
Fenestrated handles, lightweight, 4-3/4" (12.1 cm)
Adson Thumb Forceps with Fenestrated Handles are handcrafted from surgical grade German stainless steel. Available in a variety of forms: for dressings with a serrated platform or for tissue with a serrated platform and 1x2 teeth. This lightweight model is ideal for plastic surgery procedures or any other procedure where surgeon fatigue may pose an issue.
Adson Thumb Forceps – Tungsten Carbide
SKU:
QS-01-130
Tungsten Carbide
Adson Thumb Forceps are handcrafted from tungsten carbide for a durable and strong instrument. Available in a variety of forms: for dressings with a serrated platform or for tissue with a serrated platform and 1x2 teeth. Each style is also available in a delicate pattern and at several different lengths for a comfortable grip. Tungsten carbide forceps feature tips made from tungsten carbide, the hardest metal made for surgical instruments. Precision-milled serrations are formed onto the tungsten carbide inserts, resulting in pyramid-shaped teeth that provide a non-slip grip. Pyramid-shaped teeth align perfectly with each other to provide a durable and reliable grasp of the most delicate or toughest tissues, as well as needles, sutures, dressing materials and delicate vessels. Smooth tungsten carbide inserts are also available for delicate procedures. Spring tension allows for surgeons to maintain proper and consistent position, ensuring optimal grip without having to apply excess force. These forceps feature gold-plated handles.
Thumb Forceps – Fenestrated Handles
SKU:
QS-01-349
Fenestrated handles, lightweight, tissue forceps, 1x2 teeth, 4-3/4" (12.1 cm)
Adson-Micro Thumb Forceps with Fenestrated Handles are handcrafted from surgical grade German stainless steel. Available with 1x2 teeth for handling tissues. This lightweight model is ideal for plastic surgery procedures. This instrument is protected by Qari Surgical manufacturer warranty on defects in materials and workmanship.
Reviews
There are no reviews yet.