Name | Gelpi-Seltz Retractor |
Lead Time | Lead time advised within 48 hours of order placement. |
Specialty | General Instruments-Hooks & Retractors – Self-Retaining Retractors |
Material Finish | Stainless Steel |
Grade | Premium Operating Room |
Units of Measurement | Each |
Manufacturer | Qari Surgical |
Sterility | Non-Sterile |
Usage | Reusable |
Gelpi-Seltz Retractor
Gelpi-Seltz Retractor
90-degree bent tips, 6-3/4″ (17.1 cm)
Gelpi-Seltz Retractor is designed with 90 degree bent tips at the end of the blades, which are also bowed away from each other so that an incision can be kept apart during general surgical procedures. Due to the fact that these tips are smaller in size, its performance is greater when used to retract incisions that are shallower. Once the proper position is applied, the locking mechanism enables the instrument to stay in place until it is released.
SKU:
QS-01-520
Category: Hooks & Retractors
Description
Reviews (0)
Be the first to review “Gelpi-Seltz Retractor” Cancel reply
Related products
Deaver Retractor – Flat Handle, Curved End
SKU:
QS-01-509
Deaver Retractor - Flat Handle, Curved End
flat handle, flexible, curved end
Deaver Retractor is flexible and includes a flat handle with a curved end. This uniquely shaped retractor allows the surgeon to have a more comfortable hold while positioning it during surgeries. These surgeries typically involve areas in the deep abdominal or chest cavity. The flexible nature of the slightly curved blade may help to prevent injury to the organs area being held. In order to accommodate certain cases, this instrument is offered in various blade widths and lengths.
Deaver Retractor – Double-Ended
SKU:
QS-01-507
Double-Ended
double-ended, 1" wide x 9" long
Deaver Retractor is typically used during abdominal procedures to keep the organs from interfering with the surgical site. This double-ended instrument has a long, curved blade on one end and a short, right angle blade on the other end. The shorter end may help to retract the walls of the bladder during intravesical surgeries, and the longer end may be helpful for deeper retractions.
Cottle Tenaculum
SKU:
QS-01-501
Cottle Tenaculum
angled, 6-1/4" (16.0 cm)
Cottle Tenaculum has a long, slim handle with a hook that tapers into an angled point. The primary use of this hook is to grasp or hold tissue away from the surgical site in order to provide the surgeon with greater visibility to the area. This instrument is offered in a 6 ¼" length.
Abdominal Retractor W/ Fixed Side Blades – 2 1/2″ Deep
SKU:
QS-01-479
w/ fixed fenestrated side blades, 2-1/2" deep & center blade #2470-72 (3" x 2")
Balfour Abdominal Retractor with Fixed Side Blades incorporates 2 ½" deep fenestrated side blades that are attached onto the center blade, which is 3" wide x 2" deep. Two different sizes of this retractor are offered according to the maximum spread they provide. The side blades of this particular retractor can be pushed and held away from each other to open up an incision in the abdominal cavity.
Crile Retractor
SKU:
QS-01-502
Crile Retractor
double-ended, 3.0 mm x 11.0 mm & 6.0 mm x 20.0 mm blades, 4-1/2" (11.4 cm)
Crile Retractor is a hand-held instrument that can hold back tissue or organs so that the surgical site can be accessed. This retractor has a wide body and right-angle blades on each end to maintain the desired position once inserted around the edges of an incision. It is offered in a 4 ½" length, which is idea for smaller openings.
Davis Retractor
SKU:
QS-01-506
Double-ended, 5.0 mm x 16.0 mm & 8.0 mm x 21.0 mm blades, 5-1/2" (14.0 cm)
Davis Retractor is a stainless steel instrument that is double-ended and has opposing blades on either end. This retractor is able to divide and keep edges of an incision open. This instrument is also protected by the Qari Surgical manufacturer warranty on defects in materials and workmanship.
Barsky Skin Hook
SKU:
QS-01-494
Knurled handle, 6" (15.2 cm), sharp
Barsky Skin Hook can be used in various medical procedures where skin or soft tissue needs to be maneuvered, such as procedures involving plastic surgery or ophthalmology. The knurled handle contributes to a better grip for the surgeon, and the hook at the end contains a sharp prong that can be single or double. The high quality stainless steel used to produce this instrument may help to prevent bacteria from adhering to its surface during an operation.
Balfour Fourth Blade Attachment
SKU:
QS-01-485
Balfour Fourth Blade Attachment
for detachable balfour retractor systems
Balfour Fourth Blade Attachment is especially designed to be used as an addition to the Detachable Balfour Retractor Systems. The long, flat blade can accommodate to different spread sizes to fit the needs of the procedure being conducted. It also contains an option for the right arm or left arm depending on the area of the abdominal wall that needs to be retracted.
Reviews
There are no reviews yet.