Name | Ragnell Retractor – Standard Handle |
Lead Time | 0-3 days |
Specialty | General Instruments-Hooks & Retractors – Retractors |
Material Finish | Stainless Steel |
Grade | Premium Operating Room |
Units of Measurement | Each |
Manufacturer | Qari Surgical |
Sterility | Non-Sterile |
Usage | Reusable |
Ragnell Retractor – Standard Handle
Standard handle, double-ended, 3.0mm x 8.0mm blades, 5.0mm x 15.0 mm blades, 6-1/4″ (16.0 cm)
Ragnell Retractor can be applied during general surgical procedures, particularly during small orthopedic procedures. For instance, the retractor features blades on both ends of the handle and can be used to elevate structures that keep organs or tissues in place. Made from premium grade stainless steel, this instrument is resistant to corrosion even after frequent sterilization.
SKU:
QS-01-566
Category: Hooks & Retractors
Description
Reviews (0)
Be the first to review “Ragnell Retractor – Standard Handle” Cancel reply
Related products
Balfour Narrow Center Blade
SKU:
QS-01-486
Balfour Narrow Center Blade
for detachable balfour retractor systems
Balfour Narrow Center Blade consists of a flat blade on one end that is curved at a right angle. This blade also contains small lips on the edges to keep a large incision open. The handle of this instrument is fenestrated and has small loops that rods from lateral blades can fit onto in order to create the desired spread size.
Balfour-Baby Pediatric Abdominal Retractor
SKU:
QS-01-493
Balfour-Baby Pediatric Abdominal Retractor
Balfour-Baby Pediatric Abdominal Retractor has a maximum spread of 3 ½," which is ideal for smaller patients, such as young children. This retractor system also includes fixed fenestrated side blades that help to spread open an incision and allow for adequate inspection of the abdominal cavity.
Balfour Standard Center Blade – For Fixed System
SKU:
QS-01-489
Cushing Vein Retractor
SKU:
QS-01-503
Cushing Vein Retractor
Cushing Vein Retractor has a sharply curved blade and is a popular retractor used during neurosurgery or as rib spreaders. In this way, the ribs or the tissues that are held can be pulled and kept away from the surgical area. Depending on the situation, this instrument is available in different lengths and widths.
Deaver Retractor – Double-Ended
SKU:
QS-01-507
Double-Ended
double-ended, 1" wide x 9" long
Deaver Retractor is typically used during abdominal procedures to keep the organs from interfering with the surgical site. This double-ended instrument has a long, curved blade on one end and a short, right angle blade on the other end. The shorter end may help to retract the walls of the bladder during intravesical surgeries, and the longer end may be helpful for deeper retractions.
Balfour Standard Center Blade – For Fixed System
SKU:
QS-01-490
For balfour retractor systems w/ fixed side blades
Balfour Supra-Pubic Center Blade is available in different sizes to accommodate different surgical procedures and patients. The blade is curved and has lips around the edges to assist in operations such as a Suprapubic Cystostomy. This center blade may also be detached when used with the Balfour Retractor Systems.
Cottle Tenaculum
SKU:
QS-01-501
Cottle Tenaculum
angled, 6-1/4" (16.0 cm)
Cottle Tenaculum has a long, slim handle with a hook that tapers into an angled point. The primary use of this hook is to grasp or hold tissue away from the surgical site in order to provide the surgeon with greater visibility to the area. This instrument is offered in a 6 ¼" length.
Glass Abdominal Retractor
SKU:
QS-01-523
Abdominal Retractor
6" (15.2 cm) x 3-1/4" (8.3 cm), 9-3/4" (24.5 cm)
B.E. Glass Abdominal Retractor contains a flexible blade with a strong curve that is affixed to a handle for gripping purposes. This type of retractor is intended to be used during surgeries that require retracting or exposing the organs in order to provide better accessibility for the surgeon.
Reviews
There are no reviews yet.