Name | Rigby Retractor |
Lead Time | 0-3 days |
Specialty | General Instruments-Hooks & Retractors – Self-Retaining Retractors |
Material Finish | Stainless Steel |
Grade | Premium Operating Room |
Units of Measurement | Each |
Manufacturer | Qari Surgical |
Sterility | Non-Sterile |
Usage | Reusable |
Rigby Retractor
Rigby Retractor
blades 13/16″ x 2-1/2″ deep (2.1 cm x 6.4 cm), 7-1/2″ (19.1 cm)
Rigby Retractor is self-retaining, which allows it to be kept in place once applied in a desired position. The ring-handles contribute to better handling of the instrument and are comprised of a locking mechanism that enables it to be maintained. Furthermore, the 2 ½” deep flat blades play a role in the retraction method during procedures such as an appendectomy.
SKU:
QS-01-572
Category: Hooks & Retractors
Description
Reviews (0)
Be the first to review “Rigby Retractor” Cancel reply
Related products
Abdominal Retractor W/ Fixed Side Blades – 2 1/2″ Deep
SKU:
QS-01-479
w/ fixed fenestrated side blades, 2-1/2" deep & center blade #2470-72 (3" x 2")
Balfour Abdominal Retractor with Fixed Side Blades incorporates 2 ½" deep fenestrated side blades that are attached onto the center blade, which is 3" wide x 2" deep. Two different sizes of this retractor are offered according to the maximum spread they provide. The side blades of this particular retractor can be pushed and held away from each other to open up an incision in the abdominal cavity.
Balfour Standard Center Blade – For Detachable System
SKU:
QS-01-487
Detachable System
for detachable balfour retractor systems
Balfour Standard Center Blade is designed to be used with the detachable Balfour Retractor Systems. This blade is offered in two different sizes and contains a curved blade with lips on the outer edge to keep an incision open. The handle of this center blade is fenestrated in the middle and includes placement holes so that it can spread to different sizes.
Cope Retractor
SKU:
QS-01-500
Double-ended, 6.0 mm & 11.0 mm, 7-1/8" (18.0 cm)
Cope Retractor is a double-ended surgical instrument primarily used to pull back skin or organs that may obstruct the operating area. The main features of this retractor are its different shaped blades. For example, one end contains a strongly curved blade with a lip. The other end, however, contains a sharp, right angle blade with a ridge on the tip.
Balfour Abdominal Retractor W/ Fixed Side Blades
SKU:
QS-01-482
w/ ratchet bar mechanism, w/ fixed fenestrated side blades, 7-1/8" (18.1 cm) maximum spread
Balfour Abdominal Retractor with Fixed Side Blades contains a ratchet bar mechanism and side blades that are fenestrated. These side blades are designed to push apart an incision while the ratchet holds the instrument in position. The solid center blade, however, can be lowered or raised to provide better visibility for the surgeon.
Balfour Extra-Deep Center Blades
SKU:
QS-01-484
For balfour retractor systems w/ fixed side blades, 2-3/4" wide x 4" deep
Balfour Extra-Deep Center Blades consists of a 4" deep blade that is curved at a right-angle. This blade may be intended for larger patients or for accessing deeper areas of the abdominal cavity so that they can be held in place. Another feature of this center blade is that it contains loop holes in the center slot so that it can provide different spreads.
Deaver Retractor – Double-Ended
SKU:
QS-01-507
Double-Ended
double-ended, 1" wide x 9" long
Deaver Retractor is typically used during abdominal procedures to keep the organs from interfering with the surgical site. This double-ended instrument has a long, curved blade on one end and a short, right angle blade on the other end. The shorter end may help to retract the walls of the bladder during intravesical surgeries, and the longer end may be helpful for deeper retractions.
Balfour Narrow Center Blade
SKU:
QS-01-486
Balfour Narrow Center Blade
for detachable balfour retractor systems
Balfour Narrow Center Blade consists of a flat blade on one end that is curved at a right angle. This blade also contains small lips on the edges to keep a large incision open. The handle of this instrument is fenestrated and has small loops that rods from lateral blades can fit onto in order to create the desired spread size.
Balfour Abdominal Retractor W/ Fixed Side Blades – 4″ Deep
SKU:
QS-01-483
w/ fixed fenestrated side blades, 4" deep & center blade #2470-73 (3-3/8" x 2-1/2")
Balfour Abdominal Retractor with Fixed Side Blades contains fenestrated side blades that are fixed onto the instrument. This retractor is primarily used during surgeries in which large abdominal incisions need to be held open to provide more visibility to the surgeon. Moreover, the instrument is offered in different sized spreads to accommodate different patients.
Reviews
There are no reviews yet.