Name | D’Errico Nerve Root Retractor |
Lead Time | 0-3 days |
Specialty | Neuro, Ortho & Spine-Retractors |
Material Finish | Stainless Steel |
Grade | Premium Operating Room |
Units of Measurement | Each |
Manufacturer | Qari Surgical |
Sterility | Non-Sterile |
Usage | Reusable |
D’Errico Nerve Root Retractor
bayonet, 6.0 mm blade, 9″ (23.0 cm) D’errico Nerve Root Retractor is designed for use in neurosurgical procedures that require manipulation of nerve roots. This retractor can help protect a nerve root from injury when the area around it is part of the surgical field. The unique bayonet design of this retractor makes it possible to effectively retract nerve roots while keeping the handle of the instrument out of the surgical field.
SKU:
QS-01-1036
Category: Hooks & Retractors
Description
Reviews (0)
Be the first to review “D’Errico Nerve Root Retractor” Cancel reply
Related products
Adson Dura & Nerve Hook
SKU:
QS-01-999
3.0 mm tip, 8" (20.0 cm) Adson Dura & Nerve Hook is crafted for use in a wide variety or neurosurgical procedures. This hook is a multipurpose instrument that can be used to retract nerves but can also be used to retract the dural layer of the meninges during craniotomies and spinal surgeries. Additionally this instrument is available with either a sharp or blunt tip making it suited for retraction of very delicate tissue matter with the blunt tip or less sensitive tissue with the sharp tip.
Adson Laminectomy Retractor
SKU:
QS-01-1000
hinged arms, 4x5 blunt prongs, 1-1/8" (2.80 cm), 12-1/8" (31.0 cm)Adson Laminectomy Retractor is ideally suited for use in retraction of muscle and soft tissue layers during laminectomy procedures. This procedure removes the lamina, a portion of the vertebrae, and it is necessary to have full access to the vertebrae in question. This retractor features ring handles for ease in handling as well as hinged arms and blunt prongs that provide a gentle but secure hold on the tissue.
Cervical Retractor Longitudinal Blade
SKU:
QS-01-1021
stainless steel, ball snap closure, blunt Cervical Retractor Longitudinal Blade is an added component to be used alongside the cervical retractor for longitudinal retraction. All five blades are made from stainless steel and a ball snap closure making them a tight fit. Each blade also features a blunt edge to prevent trauma and tearing during retraction. They are available in variety of sizes and curvature making it possible to find a suitable blade for soft tissue retraction in a number of neurosurgical scenarios and approaches to the spinal cord.
Caspar-Type Titanium Spinal Spreading System
SKU:
QS-01-1015
suitable for dorsal access to the spinal column, interchangeable blades, curved blades allow larger operative area, reduced shadowing during x-ray, unilateral & bilateral access to lamina, lightweight, corrosion resistant titanium Casper Type Titanium Spinal Spreading System a set of instruments and components that is specifically designed for retraction and spreading in orthopedic neurosurgical procedures. This instrument is suitable for dorsal access to the spinal column. It features interchangeable blades which have a slight curvature that allows for a larger operative area and reduce shadowing during x-ray. It allows for unilateral and bilateral access to lamina and is formed from a lightweight, corrosion resistant titanium. It is available as the frame only, blade support with closure, blade supporting with adjustable screw or as a complete set.
Beckmann-Eaton Laminectomy Retractor
SKU:
QS-01-1004
hinged arms, 7x7 prongs, 12-1/2" (32.0 cm) Beckmann-Eaton Laminectomy Retractor is designed for use in neurosurgical laminectomy procedures. In order to perform this procedure the soft tissue and muscle layer directly atop of the spinal need to be incised through and retracted. This instrument features hinged arms and 7x7 prongs that allow gentle but effective retraction that gives direct access to the surgical field. This retractor is available either with either sharp or blunt prongs making it a versatile instrument to satisfy any patient need or surgeon preference.
Caspar Nerve Root Retractor
SKU:
QS-01-1013
9-1/2" (24.0 cm) Caspar Nerve Root Retractor is an instrument specially made for use in neurosurgical procedures. More specifically this is used in nerve root retraction in procedures such as lumbar discectomy. The retractor blade comes in a variety of widths including: 6.0 mm, 8.0 mm and 10.0 mm making it a highly versatile retractor that can apply a varied amount of pressure depending on the circumstance.
Blount Retractor
SKU:
QS-01-1008
10" (25.0 cm)Blount Retractor is a general-purpose retractor that can be used in orthopedic surgeries. It is designed with a very flat design allowing it to effectively retract and evenly distribute the pressure being applied while keeping itself out of the surgical field. Additionally it is made with either a single or a double prong making it a highly versatile instrument that can be satisfy a variety of patient needs and surgeon preferences.
Aufranc Cobra Retractor
SKU:
QS-01-1001
10.0 mm tip, 10-1/2" (26.5 cm)Aufranc Cobra Retractor is a uniquely designed instrument for use in retraction and elevation of spinal roots. This retractor can be used in many different neurosurgical procedures but is especially useful in spinal surgeries. It features a cobra shaped head which gives it a contour well suited for maneuvering in the vicinity of nerve roots and keeping them protected. Additionally this retractor is available in four different tips making it well suited for any procedure: serrated pointed tip, smooth pointed tip, serrated blunt tip, smooth blunt tip.
Reviews
There are no reviews yet.