| Name | Holscher Nerve Root Retractor |
| Lead Time | Lead time advised within 48 hours of order placement. |
| Competitor | ;NL57556;285433;285-433;201816;20-1816;501331;50-1331;NL5755-6;2018-16;285434;285-434;201817;20-1817;2018-17;2018-16_2018-17; |
| Specialty | Neuro, Ortho & Spine-Retractors |
| Material Finish | Stainless Steel |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | Qari Surgical |
| Sterility | Non-Sterile |
| Usage | Reusable |
Holscher Nerve Root Retractor
9-1/2″ (24.0 cm) Holscher Nerve Root Retractor is ideally suited for use in retraction of nerve roots during spinal surgeries. The elevation and retraction of nerve roots keeps them safe from unintentional injury if the surrounding areas are being operated upon. This retractor features a loop shaped handle and a small hook style tip. Additionally this is available with either a 6.5 mm blade or a 13.0 mm blade making it versatile enough for any surgical scenario or any particular patient need.
Description
Reviews (0)
Related products
Carbon Fiber Radiolucent Longitudinal Blade
SKU:
QS-01-1011
ball snap closure, blunt Carbon Fiber Radiolucent Longitudinal Blade is an added component to be used alongside the cervical retractor for general purpose soft tissue retraction. All six blades are made from stainless steel and a ball snap closure making them a tight fit. Each blade also features a blunt edge preventing any excess tearing or trauma in retraction. They are available in variety of sizes making it possible to find a suitable blade for soft tissue retraction in a number of neurosurgical scenarios and approaches to the spinal cord. Additionally this instrument is radiolucent which allows it to be left in place during x-ray and can be seen through.
Carbon Fiber Radiolucent Medial Blade
SKU:
QS-01-1012
ball snap closure, w/ teeth Carbon Fiber Radiolucent Medial Blade is an added component to be used alongside the cervical retractor for general purpose soft tissue retraction. All six blades are made from stainless steel and a ball snap closure making them a tight fit. Each blade also features teeth giving them added hold in retraction. They are available in variety of sizes making it possible to find a suitable blade for soft tissue retraction in a number of neurosurgical scenarios and approaches to the spinal cord. Additionally this instrument is radiolucent which allows it to be left in place during x-ray and can be seen through.
Cervical Retractor Longitudinal Blade
SKU:
QS-01-1021
stainless steel, ball snap closure, blunt Cervical Retractor Longitudinal Blade is an added component to be used alongside the cervical retractor for longitudinal retraction. All five blades are made from stainless steel and a ball snap closure making them a tight fit. Each blade also features a blunt edge to prevent trauma and tearing during retraction. They are available in variety of sizes and curvature making it possible to find a suitable blade for soft tissue retraction in a number of neurosurgical scenarios and approaches to the spinal cord.
Blount Knee Retractor
SKU:
QS-01-1007
6.0 mm distal tip, 7" (17.5 cm) Blount Knee Retractor is a specialized instrument that is made for use in arthroplasty surgeries. The long narrow portion of this can be slid above the capsular ligament at the joint. It can also be fit around knee implants and thus is suitable for use in knee revision.
Cervical Retractor Fenestrated Blade
SKU:
QS-01-1019
stainless steel, ball snap closure, bluntCervical Retractor Fenestrated Blade is an added component to be used alongside the cervical retractor for general purpose soft tissue retraction. Both blades are made from stainless steel and a ball snap closure making them a tight fit. Each blade also features a blunt edge to prevent trauma and tearing during retraction and the fenestrations increase the surface area over which the pressure is distributed. They are available in variety of sizes and curvatures making it possible to find a suitable blade for soft tissue retraction in a number of neurosurgical scenarios and approaches to the spinal cord.
Adson Laminectomy Retractor
SKU:
QS-01-1000
hinged arms, 4x5 blunt prongs, 1-1/8" (2.80 cm), 12-1/8" (31.0 cm)Adson Laminectomy Retractor is ideally suited for use in retraction of muscle and soft tissue layers during laminectomy procedures. This procedure removes the lamina, a portion of the vertebrae, and it is necessary to have full access to the vertebrae in question. This retractor features ring handles for ease in handling as well as hinged arms and blunt prongs that provide a gentle but secure hold on the tissue.
Beckmann-Eaton Laminectomy Retractor
SKU:
QS-01-1004
hinged arms, 7x7 prongs, 12-1/2" (32.0 cm) Beckmann-Eaton Laminectomy Retractor is designed for use in neurosurgical laminectomy procedures. In order to perform this procedure the soft tissue and muscle layer directly atop of the spinal need to be incised through and retracted. This instrument features hinged arms and 7x7 prongs that allow gentle but effective retraction that gives direct access to the surgical field. This retractor is available either with either sharp or blunt prongs making it a versatile instrument to satisfy any patient need or surgeon preference.
Carbon Fiber Radiolucent Lateral Blade
SKU:
QS-01-1010
ball snap closure, w/ teeth Carbon Fiber Radiolucent Lateral Blade is an added component to be used alongside the cervical retractor for general purpose soft tissue retraction. All six blades are made from stainless steel and a ball snap closure making them a tight fit. Each blade also features teeth giving them added hold in retraction. They are available in variety of sizes making it possible to find a suitable blade for soft tissue retraction in a number of neurosurgical scenarios and approaches to the spinal cord. Additionally this instrument is radiolucent which allows it to be left in place during x-ray and can be seen through.
Reviews
There are no reviews yet.