Name | Jannetta Posterior Fossa Retractor |
Lead Time | Lead time advised within 48 hours of order placement. |
Competitor | ;NL1185;579000;57-9000;5790-00;NL1185001;NL1185-001;579022;57-9022;5790-22;NL1185002;NL1185-002;579024;57-9024;5790-24;NL1185003;NL1185-003;579026;57-9026;5790-26;NL1185004;NL1185-004;579028;57-9028;5790-28;NL1185005;NL1185-005;579030;57-9030;5790-30;NL1185006;NL1185-006;579032;57-9032;5790-32;NL1185007;NL1185-007;579034;57-9034;5790-34;NL1185008;NL1185-008;579036;57-9036;5790-36;NL1185009;NL1185-009;579038;57-9038;5790-38;5790-00_5790-38; |
Specialty | Neuro, Ortho & Spine-Retractors |
Material Finish | Stainless Steel |
Grade | Premium Operating Room |
Units of Measurement | Each |
Manufacturer | Qari Surgical |
Sterility | Non-Sterile |
Usage | Reusable |
Jannetta Posterior Fossa Retractor
Jannetta Posterior Fossa Retractor is a specialized instrument for use in neurosurgical procedures. Specifically it can be utilized in craniotomies and other neurosurgeries that require retraction of the soft tissue and other layers in the posterior cranial fossa. This retractor features a round handle for manual operation. Additionally it is available with a variety of different blades ranging in size and malleability or in a full set with a retractor body, double round bar and all six retractor blades.
SKU:
QS-01-1060
Category: Hooks & Retractors
Description
Reviews (0)
Be the first to review “Jannetta Posterior Fossa Retractor” Cancel reply
Related products
Cervical Tissue Retractor
SKU:
QS-01-1024
1 blunt prong, 13.0 mm depth, 5-1/8" (13.0 cm)Â Cervical Tissue Retractor is ideally crafted for soft tissue retraction in the cervical spinal area. This retractor also features one blunt prong that allows for exploration and movement without damage or trauma to surrounding tissue. This can be used in orthopedic neurosurgical procedures such as anterior laminectomies.
Caspar-Type Titanium Spinal Spreading System
SKU:
QS-01-1015
suitable for dorsal access to the spinal column, interchangeable blades, curved blades allow larger operative area, reduced shadowing during x-ray, unilateral & bilateral access to lamina, lightweight, corrosion resistant titanium Casper Type Titanium Spinal Spreading System a set of instruments and components that is specifically designed for retraction and spreading in orthopedic neurosurgical procedures. This instrument is suitable for dorsal access to the spinal column. It features interchangeable blades which have a slight curvature that allows for a larger operative area and reduce shadowing during x-ray. It allows for unilateral and bilateral access to lamina and is formed from a lightweight, corrosion resistant titanium. It is available as the frame only, blade support with closure, blade supporting with adjustable screw or as a complete set.
Adson Dura & Nerve Hook
SKU:
QS-01-999
3.0 mm tip, 8" (20.0 cm)Â Adson Dura & Nerve Hook is crafted for use in a wide variety or neurosurgical procedures. This hook is a multipurpose instrument that can be used to retract nerves but can also be used to retract the dural layer of the meninges during craniotomies and spinal surgeries. Additionally this instrument is available with either a sharp or blunt tip making it suited for retraction of very delicate tissue matter with the blunt tip or less sensitive tissue with the sharp tip.
Adson Cerebellar Retractor
SKU:
QS-01-998
7-1/2" (19.0 cm), 22.0 mm deep Adson Cerebellar Retractor is a specialized instrument that is used in neurosurgical procedures. This tool can be used for retraction of the cerebellum, it is protected from damage by placement of cotton strips. There is a ratcheting mechanism that allows the ring handles to be locked at a certain width and held there. Additionally this retractor is available with either straight or angled arms and either sharp or blunt prongs makes this a highly versatile instrument that can satisfy any particular surgeon preference of patient need.
Carbon Fiber Radiolucent Longitudinal Blade
SKU:
QS-01-1011
ball snap closure, blunt Carbon Fiber Radiolucent Longitudinal Blade is an added component to be used alongside the cervical retractor for general purpose soft tissue retraction. All six blades are made from stainless steel and a ball snap closure making them a tight fit. Each blade also features a blunt edge preventing any excess tearing or trauma in retraction. They are available in variety of sizes making it possible to find a suitable blade for soft tissue retraction in a number of neurosurgical scenarios and approaches to the spinal cord. Additionally this instrument is radiolucent which allows it to be left in place during x-ray and can be seen through.
Caspar Nerve Root Retractor
SKU:
QS-01-1013
9-1/2" (24.0 cm)Â Caspar Nerve Root Retractor is an instrument specially made for use in neurosurgical procedures. More specifically this is used in nerve root retraction in procedures such as lumbar discectomy. The retractor blade comes in a variety of widths including: 6.0 mm, 8.0 mm and 10.0 mm making it a highly versatile retractor that can apply a varied amount of pressure depending on the circumstance.
Blount Retractor
SKU:
QS-01-1008
10" (25.0 cm)Blount Retractor is a general-purpose retractor that can be used in orthopedic surgeries. It is designed with a very flat design allowing it to effectively retract and evenly distribute the pressure being applied while keeping itself out of the surgical field. Additionally it is made with either a single or a double prong making it a highly versatile instrument that can be satisfy a variety of patient needs and surgeon preferences.
Campbell Nerve Retractor
SKU:
QS-01-1009
10.5 mm wide blade, 8-7/8" (22.5 cm)Â Campbell Nerve Retractor is specially designed for use in neurosurgical and other procedures that require manipulation and retraction of nerves. This retractor features a ribbed handle from which extends a slightly curved neck and a retraction blade. The slightly sloping the neck gives this an ideal contour for use in the spinal surgery or in craniotomies.
Reviews
There are no reviews yet.