| Name | Love Bayonet Nerve Root Retractor |
| Lead Time | Lead time advised within 48 hours of order placement. |
| Competitor | ;FF700R;575060;57-5060;00300000000;00-3000-000-00;5750-60; |
| Specialty | Neuro, Ortho & Spine-Retractors |
| Material Finish | Stainless Steel |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | Qari Surgical |
| Sterility | Non-Sterile |
| Usage | Reusable |
Love Bayonet Nerve Root Retractor
8-1/4″ (21.0 cm) Love Bayonet Nerve Root Retractor is ideally used in neurosurgical procedures that require retraction of the nerve root. This retractor can be used to elevate and protect a nerve root while if it is within the surgical field but needs to remain uninjured. The bayonet style of this retractor allows it to slip between small areas without causing disturbance. Additionally the very tip of this retractor features a small curved hook that increases its ability to anchor itself to aid in retraction.
Description
Reviews (0)
Related products
Carbon Fiber Radiolucent Longitudinal Blade
SKU:
QS-01-1011
ball snap closure, blunt Carbon Fiber Radiolucent Longitudinal Blade is an added component to be used alongside the cervical retractor for general purpose soft tissue retraction. All six blades are made from stainless steel and a ball snap closure making them a tight fit. Each blade also features a blunt edge preventing any excess tearing or trauma in retraction. They are available in variety of sizes making it possible to find a suitable blade for soft tissue retraction in a number of neurosurgical scenarios and approaches to the spinal cord. Additionally this instrument is radiolucent which allows it to be left in place during x-ray and can be seen through.
Cervical Retractor Lateral Blade
SKU:
QS-01-1020
stainless steel, ball snap closure, w/ teeth Cervical Retractor Lateral Blade is an added component to be used alongside the cervical retractor for medial retraction. All five blades are made from stainless steel and a ball snap closure making them a tight fit. Each blade also features teeth that are variety in their size and curvature making it possible to find a suitable blade for soft tissue retraction in a number of neurosurgical scenarios and approaches to the spinal cord.
Cloward Style Blade Retractor
SKU:
QS-01-1026
7-1/2" (19.0 cm)Cloward Style Blade Retractor is a highly versatile instrument crafted for use in a variety of neurosurgical procedures. It is best suited for use in retraction such as that which is necessary in spinal surgery. The ribbed handle giving additional gripping ability and the angled blade design makes it easy to manipulate in the surgical field while keeping the handle out of the plane of surgery. Additionally this retractor is available in four different sizes 13.0 mm (no lip), 18.0 mm, 20.0 mm and 25.0 mm.
Blade Ejector Forceps
SKU:
QS-01-1006
for changing blades w/ ball snap system, 4-1/2" (11.5 cm) Blade Ejector Forceps are crafted for use along side a variety of different blades. It is ideally suited for changing blades with a ball snap system, all of which are also available by Surgical. These forceps are hand-crafted by certified instrument makers to conform to the highest standards in instrumentation. This instrument is a valuable addition to any surgical repertoire specifically in quickly and effectively changing blades.
Caspar Nerve Root Retractor
SKU:
QS-01-1013
9-1/2" (24.0 cm) Caspar Nerve Root Retractor is an instrument specially made for use in neurosurgical procedures. More specifically this is used in nerve root retraction in procedures such as lumbar discectomy. The retractor blade comes in a variety of widths including: 6.0 mm, 8.0 mm and 10.0 mm making it a highly versatile retractor that can apply a varied amount of pressure depending on the circumstance.
Adson Cerebellar Retractor
SKU:
QS-01-998
7-1/2" (19.0 cm), 22.0 mm deep Adson Cerebellar Retractor is a specialized instrument that is used in neurosurgical procedures. This tool can be used for retraction of the cerebellum, it is protected from damage by placement of cotton strips. There is a ratcheting mechanism that allows the ring handles to be locked at a certain width and held there. Additionally this retractor is available with either straight or angled arms and either sharp or blunt prongs makes this a highly versatile instrument that can satisfy any particular surgeon preference of patient need.
Bennett Bone Retractor
SKU:
QS-01-1005
9-1/2" (24.1 cm) Bennett Bone Retractor is designed for use in retraction of bone during surgical intervention. It features a large handle that features a rounded tip for ease in handling. Additionally the functional portion of this instrument has a flat neck that is at a slight angle and flares out and makes a distinctive leaf shape that is also rounded at its tip. The head of this piece is available in two widths 45.0 mm and 65.0 mm making it versatile enough for small and large bones.
Campbell Nerve Retractor
SKU:
QS-01-1009
10.5 mm wide blade, 8-7/8" (22.5 cm) Campbell Nerve Retractor is specially designed for use in neurosurgical and other procedures that require manipulation and retraction of nerves. This retractor features a ribbed handle from which extends a slightly curved neck and a retraction blade. The slightly sloping the neck gives this an ideal contour for use in the spinal surgery or in craniotomies.
Reviews
There are no reviews yet.