Bucy Cordotomy Knife
SKU:
QS-01-1139
1/2" (6.0 mm) blade, 6-1/2" (16.5 cm)Bucy Cordotomy Knife is specifically designed for use in cordotomy procedures. The precise cutting abilities of this knife make it an ideal choice for incisions of nervous tissue and of the cord itself. In cordotomies, patients that are suffering from often chronic pain undergo a surgical procedure that severs portions of the spinal cord involved in transmission of pain. Additionally this knife is available in four different designs including forward and backward cutting and right and left cutting.
Bunnell Dissecting Probe
SKU:
QS-01-967
Bunnell Dissecting Probe
angular tip, 5-1/2" (14.0 cm)
Bunnell Dissecting Probe is crafted for use in exploration during orthopedic surgery. It features a handle that taper at one end and features a pointed, slightly angular tip at the other. It can be used to explore areas that features many different types of tissue such as in the hand to navigate around the layers and access the areas of layers in question such as the tendons. This probe is hand crafted by certified instrument makers to conform to the highest standards in instrumentation.
Bunnell Drill
SKU:
QS-01-983
Bunnell Drill
cannulated, 3 jaw stainless steel chuck, accepts wires & pins up to 5/32" (4.0 mm), aluminum body Bunnell Drill is a specialized instrument used for drilling through bone in neurosurgical and orthopedic procedures. This instrument is cannulated and features stainless steel chuck. This drill is uniquely designed with a hollow design that allow for wires and pins to pass through it up to a diameter of 4.0 cm. Additionally this drill is designed with an aluminum body and comes in a design that features a chuck key.
Bunnell Tendon Passer & Probe
SKU:
QS-01-968
Bunnell Tendon Passer & Probe
malleable, 5.0 mm diameter
Bunnell Tendon Passer and Probe is a versatile instrument ideally suited for use in orthopedic surgical procedures. It is a malleable instrument that is designed to deliver tendons to the area where they are needed. This can be useful in procedures such as repair of tendons in the hand in which it is necessary to guide the tendon through the lumbrical canal and navigate other crucial areas with the tendon. This instrument doubles as a probe and can be used in general exploration of areas before using it to guide a tendon. This instrument is available in either 7.25" or 9" making it suitable for a variety of patient needs and surgeon preferences.
Bunnell Tendon Stripper
SKU:
QS-01-969
Bunnell Tendon Stripper
round, 6" (15.0 cm)
Bunnell Tendon Stripper is a specialized instrument crafted for use in orthopedic surgical procedures. This instrument is designed to strip down or whittle down tendons to an appropriate size. This can be useful in tendon graft procedures or in other surgical interventions of the tendons that require for the diameter of it to be stepped down. Additionally this instrument is available in a range of sizes from 2.0 – 7.0 mm diameter making it adequate for any patient need or surgeon preference.
Campbell Nerve Retractor
SKU:
QS-01-1009
10.5 mm wide blade, 8-7/8" (22.5 cm)Â Campbell Nerve Retractor is specially designed for use in neurosurgical and other procedures that require manipulation and retraction of nerves. This retractor features a ribbed handle from which extends a slightly curved neck and a retraction blade. The slightly sloping the neck gives this an ideal contour for use in the spinal surgery or in craniotomies.
Capsule Retractor
SKU:
QS-3991
3 sharp prongs, 22.0 mm blade, 10" (25.0 cm)Â Capsule Retractor is a uniquely designed instrument for use in some orthopedic interventions such as Bankart surgeries . Specifically three sharp pronged design can be placed on the medial aspect of the neck of the scapula. Retraction of the labrium as well as the anterior capsule is accomplished with this retractor.
Capsule Scissors
SKU:
QS-01-970
Capsule Scissors
angled, 9-1/2" (24.0 cm)
Capsule Scissors are a versatile instrument ideally suited for use in orthopedic surgical procedures of the joints. It is specially designed for use in handle and cutting the capsule of joints. This makes this instrument useful in a variety of procedures involving the shoulder, knee or other joint areas of the body that have a capsule. The sharp tips of these scissors allows a clean and effective cut and the angle at which the jaws are set allow them to access deeper more difficult to reach regions.
Carbon Fiber Radiolucent Lateral Blade
SKU:
QS-01-1010
ball snap closure, w/ teeth Carbon Fiber Radiolucent Lateral Blade is an added component to be used alongside the cervical retractor for general purpose soft tissue retraction. All six blades are made from stainless steel and a ball snap closure making them a tight fit. Each blade also features teeth giving them added hold in retraction. They are available in variety of sizes making it possible to find a suitable blade for soft tissue retraction in a number of neurosurgical scenarios and approaches to the spinal cord. Additionally this instrument is radiolucent which allows it to be left in place during x-ray and can be seen through.
Carbon Fiber Radiolucent Longitudinal Blade
SKU:
QS-01-1011
ball snap closure, blunt Carbon Fiber Radiolucent Longitudinal Blade is an added component to be used alongside the cervical retractor for general purpose soft tissue retraction. All six blades are made from stainless steel and a ball snap closure making them a tight fit. Each blade also features a blunt edge preventing any excess tearing or trauma in retraction. They are available in variety of sizes making it possible to find a suitable blade for soft tissue retraction in a number of neurosurgical scenarios and approaches to the spinal cord. Additionally this instrument is radiolucent which allows it to be left in place during x-ray and can be seen through.
Carbon Fiber Radiolucent Medial Blade
SKU:
QS-01-1012
ball snap closure, w/ teeth Carbon Fiber Radiolucent Medial Blade is an added component to be used alongside the cervical retractor for general purpose soft tissue retraction. All six blades are made from stainless steel and a ball snap closure making them a tight fit. Each blade also features teeth giving them added hold in retraction. They are available in variety of sizes making it possible to find a suitable blade for soft tissue retraction in a number of neurosurgical scenarios and approaches to the spinal cord. Additionally this instrument is radiolucent which allows it to be left in place during x-ray and can be seen through.
Caroll Tendon Pulling Forceps
SKU:
QS-01-971
Caroll Tendon Pulling Forceps
curved shaft, alligator type, 2.0 mm x 8.0 mm serrated jaws, 5-1/2" (14.0 cm) overall length
Caroll Tendon Pulling Forceps are ideally suited for use in orthopedic procedures. Specifically they can be used to repair torn or disconnected tendons or can be used to keep a hold of a tendon as a muscle is being manipulated throughout surgery. This forceps can be used in procedures such as tendon transfer of the hand to regain lost hand function or to repair a complete tear of the patellar tendon. This instrument features a curved shaft with serrated jaws and is of the alligator type which gives it unparalleled reach for accessing tendon in a variety of locations.