| Name | Bone Holding Forceps |
| Lead Time | Lead time advised within 48 hours of order placement. |
| Specialty | Neuro, Ortho & Spine-Bone Holding Forceps |
| Material Finish | Stainless Steel |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | Qari Surgical |
| Sterility | Non-Sterile |
| Usage | Reusable |
Bone Holding Forceps
Bone Holding Forceps
delicate, straight, 2×2 teeth, 5.0 mm wide, 7-7/8″ (20.0 cm)
Bone Holding Forceps are a general purpose instrument that can be used in many different surgical procedures that require manipulation of bone. These forceps are specifically designed for use in handling delicate bones such as smaller phalangeal and metacarpal bones that require a small circumference tool. Additionally it features 2×2 teeth that allow it to effectively grip the bone without causing puncture to the bone itself.
Description
Reviews (0)
Related products
Bone Graft Holder (Caspar Type)
SKU:
QS-01-889
8.0 mm x 15.0 mm tip, 21.0 cm
Capsar Type Bone Graft Holder is ideally suited for use in orthopedic type procedures that require the use of a bone graft. This instrument is made to hold and handle the bone graft until it is inserted into the area where it is necessary and secured into place. This holder features a large rounded handle from which extends a body that ends in a mechanism for grasping the bone graft. This instrument features a 8.0 mm x 15.0 mm tip
Bone Graft Impactor (Caspar Type)
SKU:
QS-01-890
Bone Graft Impactor (Caspar Type)
graduated 1/4" to 1-1/4", shaft 6-1/4" (16.0 cm)Bone Graft Impactor is of the Casper type and is a multi-purpose instrument that can be used in a variety of orthopedic procedures. Specifically it is designed for use in bone grafting procedures to ensure that the graft is properly settled into place. It features a handle from which the tapering body extends ending in a small circular head perfect for setting on the graft and applying force. This instrument is graduated ¼" to 1 ¼" and features a shaft of 6 ¼". This instrument is available in three sizes 3.0 mm, 5.0 mm and 8.0 mm.
Vertebral Body Dissector (Caspar Type)
SKU:
QS-01-896
Vertebral Body Dissector (Caspar Type)Caspar Type Vertebral Body Dissector is ideally suited for use in neurosurgical procedures of the spine. A dissector is designed to be inserted between the vertebral bodies to increase the space between two adjacent vertebrae. This increase in space allows for the surgeon to see the surgical field more clearly and also gives adequate space for the procedure to be performed. This dissector is available in small or large making it an adequate fit for a variety of patient needs and surgeon preferences.
Cervical Vertebral Body Multi Level Distractor elongated toothed bar
SKU:
QS-01-892
Cervical Vertebral Body Multi Level Distractor
elongated toothed bar Caspar Cervical Vertebral Distractor Drill Guide is crafted for use alongside the Casper Cervical Vertebral Distractor. Some spinal procedures also require the use of a drill and this guide can be used in conjunction with them to ensure the drill follows the trajectory intended by the surgeon. Additionally the use of a guide helps to protect surrounding tissue areas from the trauma that can be inflicted by a high powered tool like a drill. This instrument is available in either a left or right design making it suitable for a variety of specific purposes.
Bone Reduction Forceps
SKU:
QS-01-904
Bone Reduction Forceps - Jaws Slightly Curved
jaws slightly curved, 5-1/2" (14.0 cm)
Bone Reduction Forceps is a highly versatile instrument made for use in orthopedic surgeries that require alignment and manipulation of bone. This forceps comes equipped with ring handles for ease in manual operation as well as a ratcheting mechanism that allows the surgeon to set it at any particular width. Additionally there is a slight curvature to the jaws and measuring at 5.5" long this instrument can easily fit into small spaces and smaller sized bones.
Twist Drill
SKU:
QS-01-895
Twist Drill
drilling depth 8.0 mm, length 5-3/4" (14.6 cm)
Twist Drill is a unique drilling instrument designed to create new holes to increase access to certain areas such as through the skull to the brain tissue. This instrument is crafted to distribute the force from the center of the drill point out and thus is ideal in creating new holes without the use of pilot holes. A variety of surgeries including craniotomies can benefit from a specialized drill such as this one. Additionally this instrument has a drilling depth of 8.0 mm and a length of 14.6 cm.
Bone Reduction Forceps
SKU:
QS-01-905
Bone Reduction Forceps - Pointed Tips W/ Serrations, Curved
pointed tips w/ serrations, curved
Bone Reduction Forceps are ideal for surgeries to restore fractures in bone or to realign dislocations. This forceps has pointed tips and serrations that increase its ability to explore deeply in tissue as well as to maintain grasp of the bone during manipulation. It also features a curvature that allows it to be better fit to the contour of the bone. Additionally this instrument is available in 5" or 5.5" to suit the specific surgical scenario or surgeon preferences.
Bone Clamp (Reposition Forceps)
SKU:
QS-01-899
Bone Clamp (Reposition Forceps)
extra long ratchet, curved, 5-1/8" (13.0 cm)
Bone Clamp is a general purpose clamp also referred to a reposition forceps for use in variety of procedures that require clamping and handling of bone. This instrument can be used when there has been a fracture to a bone and there are fragments that need to be removed but also in procedures that require alignment of bone segments and resetting. A unique feature of this clamp is the extra long ratchet that gives it an increased spectrum of widths as well as a slight curvature which allows it to be contoured to the bone shafts.
Reviews
There are no reviews yet.