Name | Ribbon Retractor |
Lead Time | 0-3 days |
Specialty | General Instruments-Hooks & Retractors – Retractors |
Material Finish | Stainless Steel |
Grade | Premium Operating Room |
Units of Measurement | Each |
Manufacturer | Qari Surgical |
Sterility | Non-Sterile |
Usage | Reusable |
Ribbon Retractor
Ribbon Retractor
malleable
Ribbon Retractor is offered in a variety of lengths ranging from 6 ¾” to 13.” The ideal purpose of this instrument is to be used in procedures where organs or intestines need to be retracted. This retractor is also malleable, which allows it to fit the form of the area that is being operated. In order to suit different cases, several widths are available.
SKU:
QS-01-571
Category: Hooks & Retractors
Description
Reviews (0)
Be the first to review “Ribbon Retractor” Cancel reply
Related products
Deaver Retractor – Flat Handle
SKU:
QS-01-508
Deaver Retractor - Flat Handle
flat handle, flexible
Deaver Retractor with a flat handle contains a flexible curved blade that is offered in two different widths and lengths depending on the surgical requirements. During general operations, specifically the involvement of the abdominal or chest cavity, this retractor can allow the surgeon to move one side of the incision to access the area that needs attention. If a deeper section needs to be accessed, the longer and wider blade may be more beneficial.
Balfour Narrow Center Blade
SKU:
QS-01-486
Balfour Narrow Center Blade
for detachable balfour retractor systems
Balfour Narrow Center Blade consists of a flat blade on one end that is curved at a right angle. This blade also contains small lips on the edges to keep a large incision open. The handle of this instrument is fenestrated and has small loops that rods from lateral blades can fit onto in order to create the desired spread size.
Cottle Tenaculum
SKU:
QS-01-501
Cottle Tenaculum
angled, 6-1/4" (16.0 cm)
Cottle Tenaculum has a long, slim handle with a hook that tapers into an angled point. The primary use of this hook is to grasp or hold tissue away from the surgical site in order to provide the surgeon with greater visibility to the area. This instrument is offered in a 6 ¼" length.
Balfour Standard Center Blade – For Fixed System
SKU:
QS-01-489
Collin Retractor
SKU:
QS-01-498
Collin Retractor
double-ended, set of 2, 6-1/2" (16.5 cm)
Collin Retractor is designed to push back tissue that may conceal part of the area that is being operated on. With the help of the rounded double-ended blades on each end, damage to tissues is reduced while they are held firmly in the desired position. Depending on the size of the incision, this retractor comes in a set of two.
Deaver Retractor – Double-Ended
SKU:
QS-01-507
Double-Ended
double-ended, 1" wide x 9" long
Deaver Retractor is typically used during abdominal procedures to keep the organs from interfering with the surgical site. This double-ended instrument has a long, curved blade on one end and a short, right angle blade on the other end. The shorter end may help to retract the walls of the bladder during intravesical surgeries, and the longer end may be helpful for deeper retractions.
Balfour Supra-Pubic Center Blades
SKU:
QS-01-491
Center Blades
for balfour retractor systems w/ fixed side blade
Balfour Supra-Pubic Center Blades can be useful during procedures such as a Suprapubic cystotomy. When the bladder is retracted, this instrument provides the surgeon with a larger viewing area so that the procedure can be conducted. This blade is presented in two different sizes.
Cope Retractor
SKU:
QS-01-500
Double-ended, 6.0 mm & 11.0 mm, 7-1/8" (18.0 cm)
Cope Retractor is a double-ended surgical instrument primarily used to pull back skin or organs that may obstruct the operating area. The main features of this retractor are its different shaped blades. For example, one end contains a strongly curved blade with a lip. The other end, however, contains a sharp, right angle blade with a ridge on the tip.
Reviews
There are no reviews yet.