| Name | Smith Nerve Root Suction Retractor |
| Lead Time | Lead time advised within 48 hours of order placement. |
| Competitor | ;501275;50-1275;585000;58-5000;73-0990;730990;5850-00; |
| Specialty | Neuro, Ortho & Spine-Retractors |
| Material Finish | Stainless Steel |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | Qari Surgical |
| Sterility | Non-Sterile |
| Usage | Reusable |
Smith Nerve Root Suction Retractor
5-1/4″ (13.5 cm) shaft, 7″ (18.0 cm) handle Smith Nerve Root Suction Retractor is a specially designed retractor for use in a wide variety of neurosurgical procedures. This retractor is ideally suited for retraction of nerve roots during procedures such as spinal surgery that require manipulation of delicate nerve tissue. It features an angled neck to reach deep into the surgical field while keeping the handle clear of it. Additionally this instrument features a handle that can have a suction tube affixed to the end enabling it to remove blood and other fluid which keeps the surgical field clear.
Description
Reviews (0)
Related products
Beckmann-Adson Laminectomy Retractor
SKU:
QS-01-1003
hinged arms, 4x4 prongs, 12-1/8" (31.0 cm)Beckmann-Adson Laminectomy Retractor is a specialized instrument made for use in neurosurgical procedures, specifically those pertaining to the spine. This retractor has a long and slim design and features hinged arms from which 4x4 prongs extend. During laminectomy these prongs can be used to retract soft tissue and muscle layers form directly above the vertebral lamina and the ratcheting mechanism can hold the soft tissue out of way. Additionally this instrument is available in two widths 25.0 mm and 44.0 mm as well as in either sharp or blunt to accommodate a variety of surgical approaches.
Adson Laminectomy Retractor
SKU:
QS-01-1000
hinged arms, 4x5 blunt prongs, 1-1/8" (2.80 cm), 12-1/8" (31.0 cm)Adson Laminectomy Retractor is ideally suited for use in retraction of muscle and soft tissue layers during laminectomy procedures. This procedure removes the lamina, a portion of the vertebrae, and it is necessary to have full access to the vertebrae in question. This retractor features ring handles for ease in handling as well as hinged arms and blunt prongs that provide a gentle but secure hold on the tissue.
Cervical Tissue Retractor
SKU:
QS-01-1024
1 blunt prong, 13.0 mm depth, 5-1/8" (13.0 cm) Cervical Tissue Retractor is ideally crafted for soft tissue retraction in the cervical spinal area. This retractor also features one blunt prong that allows for exploration and movement without damage or trauma to surrounding tissue. This can be used in orthopedic neurosurgical procedures such as anterior laminectomies.
Carbon Fiber Radiolucent Longitudinal Blade
SKU:
QS-01-1011
ball snap closure, blunt Carbon Fiber Radiolucent Longitudinal Blade is an added component to be used alongside the cervical retractor for general purpose soft tissue retraction. All six blades are made from stainless steel and a ball snap closure making them a tight fit. Each blade also features a blunt edge preventing any excess tearing or trauma in retraction. They are available in variety of sizes making it possible to find a suitable blade for soft tissue retraction in a number of neurosurgical scenarios and approaches to the spinal cord. Additionally this instrument is radiolucent which allows it to be left in place during x-ray and can be seen through.
Adson Cerebellar Retractor
SKU:
QS-01-998
7-1/2" (19.0 cm), 22.0 mm deep Adson Cerebellar Retractor is a specialized instrument that is used in neurosurgical procedures. This tool can be used for retraction of the cerebellum, it is protected from damage by placement of cotton strips. There is a ratcheting mechanism that allows the ring handles to be locked at a certain width and held there. Additionally this retractor is available with either straight or angled arms and either sharp or blunt prongs makes this a highly versatile instrument that can satisfy any particular surgeon preference of patient need.
Blade Ejector Forceps
SKU:
QS-01-1006
for changing blades w/ ball snap system, 4-1/2" (11.5 cm) Blade Ejector Forceps are crafted for use along side a variety of different blades. It is ideally suited for changing blades with a ball snap system, all of which are also available by Surgical. These forceps are hand-crafted by certified instrument makers to conform to the highest standards in instrumentation. This instrument is a valuable addition to any surgical repertoire specifically in quickly and effectively changing blades.
Carbon Fiber Radiolucent Lateral Blade
SKU:
QS-01-1010
ball snap closure, w/ teeth Carbon Fiber Radiolucent Lateral Blade is an added component to be used alongside the cervical retractor for general purpose soft tissue retraction. All six blades are made from stainless steel and a ball snap closure making them a tight fit. Each blade also features teeth giving them added hold in retraction. They are available in variety of sizes making it possible to find a suitable blade for soft tissue retraction in a number of neurosurgical scenarios and approaches to the spinal cord. Additionally this instrument is radiolucent which allows it to be left in place during x-ray and can be seen through.
Campbell Nerve Retractor
SKU:
QS-01-1009
10.5 mm wide blade, 8-7/8" (22.5 cm) Campbell Nerve Retractor is specially designed for use in neurosurgical and other procedures that require manipulation and retraction of nerves. This retractor features a ribbed handle from which extends a slightly curved neck and a retraction blade. The slightly sloping the neck gives this an ideal contour for use in the spinal surgery or in craniotomies.
Reviews
There are no reviews yet.